The streak tube was specially produced for its streak mode applications in lidar-type systems of plasma diagnostics for thermonuclear units of takomak-type. In order to obtain an effective registration of input signals contained few quantums streak tube is provided by a wide-measure slit photocathode and an electron lens that squeezes an image of the signal at a blue/green phosphor screen applied on a fiber-optic disk. A pair of deflecting plates is made as two broadband communicational lines with coaxial connectors of 50Ohm wave resistance.

Main parameters

Type of the photocathode		S-1, S-20
Range of spectral sensitivity, nm: - photocathode S-1 - photocathode S-20		230 - 1550 230 - 850
Sensitivity of the photocathode, mА/W - photocathode S-1 (at 1060 nm wavelength ) - photocathode S-20 (at the maximum of the spectral sensitivity)		≥ 0,1 ≥ 20
Dimensions of the photocathode useful area, mm х mm		35 x 4
Diameter of the screen useful area, mm Magnification, a. u.		38 0,5
Spatial resolution of the photocathode in a statical mode, l.p./mm		≥ 20
Photocathode useful voltage, kV Accelerating gird electrode voltage related to the photocathode, kV Limiting temporal resolution of the tube operated in a streak mode, ps Sensitivity of the through-pass broadband (≥ 2 GHz) deflecting system, mm/V		12 2,5 2 ≥ 0,03
Streak tube dimensions, mm	length	380
	width / max. diameter	140 / 80
Weight, kg